Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - K36 (X2) TO M72COMPONENT CONNECTOR END VIEWSK83 PARKING BRAKE CONTROL MODULE
2013 Buick Regal Turbo Premium, Standard Trans
K83 Parking Brake Control Module
2013 Buick Regal Turbo Premium, Standard TransSECTION K83 Parking Brake Control Module
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575392 | J-35616-4A (PU) | 15315247 | 15304720 | 19 | 4 | 5 |
| II | 13575413 | J-35616-2A (GY) | 15315247 | 12191819 | 8 | E | 1 |
| III | 13575392 | J-35616-4A (PU) | 15315247 | 15304719 | 19 | E | 5 |
K83 Parking Brake Control Module
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| A | 2.5 2.5 |
RD/BU RD/WH |
42 1040 |
Battery Positive Voltage Battery Positive Voltage |
I | except CZ2 CZ2 |
| B | 0.5 | YE/RD | 7683 | Park Brake Release Switch Voltage Reference | II | - |
| C | 0.5 0.5 |
BU/VT D-BU/VT |
1134 1134 |
Park Brake Switch Signal Park Brake Switch Signal |
II | except CZ2 CZ2 |
| D | 0.5 | GY/RD | 7684 | Park Brake Apply Switch Voltage Reference | II | - |
| E | 0.5 0.5 |
BU D-BU |
2500 2500 |
High Speed GMLAN Serial Data (+) (1) High Speed GMLAN Serial Data (+) (1) |
II | except CZ2 CZ2 |
| F | 0.5 0.5 |
BU D-BU |
2500 2500 |
High Speed GMLAN Serial Data (+) (1) High Speed GMLAN Serial Data (+) (1) |
II | except CZ2 CZ2 |
| G | 0.5 0.5 |
BU D-BU |
2500 2500 |
High Speed GMLAN Serial Data (+) (1) High Speed GMLAN Serial Data (+) (1) |
II | except CZ2 CZ2 |
| H | 2.5 | BK | 2350 | Ground | I | - |
| J | - | - | - | Not Occupied | - | - |
| K | 0.5 | WH | 2501 | High Speed GMLAN Serial Data (-) (1) | II | - |
| L | 0.5 | WH | 2501 | High Speed GMLAN Serial Data (-) (1) | II | - |
| M | 0.5 | WH | 2501 | High Speed GMLAN Serial Data (-) (1) | II | - |
| N | 0.5 | YE | 1492 | Park Brake Switch Supply Voltage | II | - |
| P | 0.5 | WH/BU | 5986 | Serial Data Communication Enable | II | - |
| R | 0.5 | BN | 6107 | Park Brake Apply Switch Signal | II | - |
| S | 0.5 0.5 |
BU/BK D-BU/BK |
6108 6108 |
Park Brake Release Switch Signal Park Brake Release Switch Signal |
III | except CZ2 CZ2 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.