Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - K36 (X2) TO M72COMPONENT CONNECTOR END VIEWSK77 REMOTE CONTROL DOOR LOCK RECEIVER
2013 Buick Regal Turbo Premium, Standard Trans
K77 Remote Control Door Lock Receiver
2013 Buick Regal Turbo Premium, Standard TransSECTION K77 Remote Control Door Lock Receiver
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575782 | J-35616-64B (L-BU) | 12094429 | 928999-5 | 15 | J | J |
K77 Remote Control Door Lock Receiver
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.5 | GY | 3273 | Remote Function Actuator Return | I | - |
| 2 | 0.5 | YE/GN | 3274 | Remote Function Actuator Transmit Signal | I | - |
| 3 | 0.5 0.5 |
BU/WH D-BU/WH |
3275 3275 |
Remote Function Actuator Receive Signal Remote Function Actuator Receive Signal |
I | except CZ2 CZ2 |
| 4 | 0.5 | GY/WH | 3272 | Remote Function Actuator Supply Voltage | I | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.