Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - F106RR TO K20 (LDK)COMPONENT CONNECTOR END VIEWSK9 BODY CONTROL MODULE X7
2013 Buick Regal Turbo Premium, Standard Trans
K9 Body Control Module X7
2013 Buick Regal Turbo Premium, Standard TransSECTION K9 Body Control Module X7
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | 13575560 | J-35616-35 (VT) | J-38125-12A | SNAC-A061T-M2.8 | 20 | E | A |
| II | 13575870 | J-35616-64B (L-BU) | J-38125-12A | SNAC3-A021T-M0.64 | 20 | J | J |
K9 Body Control Module X7
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | - | - | - | Not Occupied | - | - |
| 2 | 1 | WH/BN | 6815 | Inadvertent Power Control | I | - |
| 3 | 0.75 0.75 |
GN/WH D-GN/WH |
24 24 |
Backup Lamp Supply Voltage Backup Lamp Supply Voltage |
I | except CZ2 CZ2 |
| 4 | 0.5 | D-GN/VT | 6165 | All Door Deadbolt Motor Lock Control | - | CZ2 |
| 5 | 0.5 0.5 |
WH/BN WH/GY |
3572 694 |
Driver Door Unlatch Enable Signal (BTM) Driver Door Lock Actuator Unlock Control |
- | except CZ2 CZ2 |
| 6 | 0.5 | VT/BK | 7553 | Park Lock Solenoid Control | II | - |
| 7 | 0.5 0.5 |
GN/GY D-GN/GY |
737 737 |
Trunk Lamp Control Trunk Lamp Control |
II | except CZ2 CZ2 |
| 8 | 0.5 | GY/GN | 5996 | Driver Outside Rearview Mirror Puddle Lamp Supply Voltage | - | CZ2 |
| 9 | 0.5 | YE | 6817 | LED Backlight Dimming Control | II | - |
| 10 | 0.5 | BN/YE | 186 | Fuel Door Lock Relay Control | - | CZ2 |
| 11 | 0.5 | GY | 748 | Right Rear Door Ajar Switch Signal | - | CZ2 |
| 12 | 0.5 | BN/YE | 780 | Driver Door Lock Switch Lock Signal | II | - |
| 13 | 0.5 | WH/VT | 5905 | Key Capture/Column Lock Shift Position Signal | - | BTM |
| 14 | 0.5 | GY/BK | 3268 | Child Security Lock Motor Status Signal Right Rear | - | except CZ2 |
| 15-16 | - | - | - | Not Occupied | - | - |
| 17 | 0.5 0.5 |
D-BU D-BU/WH |
3573 195 |
Non Driver Door Unlatch Enable Signal (BTM) Door Lock Control |
- | except CZ2 CZ2 |
| 18 | 0.5 | BN/WH | 781 | Driver Door Lock Switch Unlock Signal | II | - |
| 19 | 0.5 | GY | 156 | Courtesy Lamp Switch Signal | II | - |
| 20-22 | - | - | - | Not Occupied | - | - |
| 23 | 0.5 0.5 |
GN L-GN |
5060 5060 |
Low Speed GMLAN Serial Data Low Speed GMLAN Serial Data |
II | except CZ2 CZ2 |
| 24 | - | - | - | Not Occupied | - | - |
| 25 | 0.5 | BN/WH | 3269 | Child Security Lock Motor Status Signal Left Rear | - | except CZ2 |
| 26 | - | - | - | Not Occupied | - | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.