K9 Body Control Module X4

2013 Buick Regal Turbo Premium, Standard TransSECTION K9 Body Control Module X4
GM2180234
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 13277341
  • Service Connector: 13576640
  • Description: 26-Way F 0.64, 2.8 Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Core Crimp Insulation Crimp
I 13575560 J-35616-35 (VT) J-38125-12A SNAC-A061T-M2.8 20 E A
II 13575870 J-35616-64B (L-BU) J-38125-12A SNAC3-A021T-M0.64 20 Pins: 5: Pending Pins: 5: Pending
K9 Body Control Module X4

Pin Size Color Circuit Function Terminal Type ID Option
1 1.5 YE 312 Right Headlamp Low Beam Supply Voltage I T4A
2 1.5 YE 712 Left Headlamp Low Beam Supply Voltage I T4A
3 0.75
0.75
GN/VT
D-GN/VT
1315
1315
Right Front Turn Signal Lamp Supply Voltage
Right Front Turn Signal Lamp Supply Voltage
I except CZ2
CZ2
4 0.75
0.75
BU/VT
D-BU/VT
1335
1335
Right Rear Turn Signal Lamp Supply Voltage
Right Rear Turn Signal Lamp Supply Voltage
I except CZ2
CZ2
5 0.5 GY/BN 309 Right Park Lamp Supply Voltage II -
6 0.5 VT/GY 709 Left Park Lamp Supply Voltage II -
7 0.5 GY/YE 7542 Left Rear Stop Lamp Supply Voltage II CZ2
8-10 - - - Not Occupied - -
11 0.5 VT/WH 5065 Stop Lamp Relay Coil Supply Voltage II -
12 0.5
0.5
GY/VT
VT/YE
755
43
RAP Relay Coil Control
Ignition Voltage
II except CZ2
CZ2
13 0.5
0.5
GN/YE
D-GN/YE
6846
6846
Rear License Lamp Supply Voltage
Rear License Lamp Supply Voltage
II except CZ2
CZ2
14 0.5 BN/GY 2268 Windshield Washer Relay Control II -
15 0.5
0.5
GN/VT
BN/VT
5199
1594
Run/Crank Relay Coil Control
Ignition 3 Relay Control
II except CZ2
CZ2
16 0.5 GY 91 Windshield Wiper Motor Relay Coil Supply Voltage II -
17 0.5 BN/GN 196 Windshield Wiper Motor Park Switch Signal II -
18 0.5 WH/YE 5075 Current Sensor Signal II -
19 - - - Not Occupied - -
20 0.5 RD/YE 1442 Battery Positive Voltage II -
21 0.5 D-BU/VT 5076 Current Sensor Supply Voltage II except CZ2
21 0.5 RD/BU 5076 Current Sensor Supply Voltage II CZ2
22 0.5
0.5
VT/YE
D-GN/VT
5985
206
Accessory Wakeup Serial Data
Accessory/Run/Crank Ignition 0 Voltage
II except CZ2
CZ2
23 0.5
0.5
WH/D-BU
WH/BU
5986
5986
Serial Data Communication Enable
Serial Data Communication Enable
II except CZ2
CZ2
24 0.5
0.5
BN/L-GN
BN/GN
109
109
Hood Ajar Switch Signal
Hood Ajar Switch Signal
II except CZ2
CZ2
25 - - - Not Occupied - -
26 0.5
0.5
BK
BK
150
50
Ground
Ground
II except CZ2
CZ2
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.