Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTILOCK BRAKE SYSTEMDESCRIPTION AND OPERATIONABS DESCRIPTION AND OPERATIONINITIALIZATION SEQUENCE
2013 Buick Regal Turbo Premium, Standard Trans
Initialization Sequence
2013 Buick Regal Turbo Premium, Standard TransSECTION Initialization Sequence
The electronic brake control module performs one initialization test each ignition cycle. The initialization of the electronic brake control module occurs when the following conditions occur:
- The vehicle speed is greater than 16 km/h (10 MPH).
- The brake pedal is applied.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.