Radio Speaker Amplifier Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Radio Speaker Amplifier Replacement
Fig 1: Radio Speaker Amplifier & Mounting Components
GM2193483Courtesy of GENERAL MOTORS COMPANY
Radio Speaker Amplifier Replacement

Callout Component Name
Preliminary ProcedureΒ 
Remove the rear compartment side trim panel. Refer to Rear Compartment Side Trim Panel Replacement (without HP6) , Rear Compartment Side Trim Panel Replacement (HP6, Left Side) , Rear Compartment Side Trim Panel Replacement (HP6, Right Side) .
1 Radio Speaker Amplifier Nut (Qty: 3)
CAUTION:

Refer to Fastener Caution .

2 Radio Speaker Amplifier Bolt (Qty: 3)
3 Radio Speaker Amplifier Assembly

Procedure

  1. Disconnect the electrical connectors.
  2. For programming and set up information, refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.