SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSIMMOBILIZER SYSTEMREPAIR INSTRUCTIONSTHEFT DETERRENT MODULE REPLACEMENT (WITH BTM)
2013 Buick Regal Turbo Premium, Standard Trans

Theft Deterrent Module Replacement (With BTM)

2013 Buick Regal Turbo Premium, Standard TransSECTION Theft Deterrent Module Replacement (With BTM)
Fig 1: Theft Deterrent Module & Fasteners (With BTM)
GM2206945Courtesy of GENERAL MOTORS COMPANY
Theft Deterrent Module Replacement (With BTM)

Callout Component Name

Preliminary Procedures

  1. Remove the front floor console. Refer to Front Floor Console Replacement .
  2. Remove the front floor console cup holder. Refer to Front Floor Console Cup Holder Replacement .
1 Theft Deterrent Module Fastener (Qty: 2)
2 Theft Deterrent Module Assembly

Procedure

  1. Disconnect the electrical connector.
  2. Program the theft deterrent control module after replacement. Refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.