SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2013REGAL TURBO PREMIUM, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINTERIOR/EXTERIOR TRIMINSTRUMENT PANEL TRIM AND CONSOLE TRIMREPAIR INSTRUCTIONSFRONT FLOOR CONSOLE REPLACEMENT
2013 Buick Regal Turbo Premium, Standard Trans

Front Floor Console Replacement

2013 Buick Regal Turbo Premium, Standard TransSECTION Front Floor Console Replacement
Fig 1: Front Floor Console & Fasteners
GM2020243Courtesy of GENERAL MOTORS COMPANY
Front Floor Console Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the transmission control lever boot. Refer to Transmission Control Lever Boot Replacement .
  2. Remove the front floor console extension panels. Refer to Front Floor Console Extension Panel Replacement .
  3. Remove the instrument panel ashtray housing. Refer to Instrument Panel Ashtray Housing Replacement .
1 Front Floor Console Fastener (Qty: 6)
CAUTION:

Refer to Fastener Caution .


Procedure 
Move the front seats forward or backward in order to access the fasteners for removal.
2 Front Floor Console Assembly

Procedures

  1. Disconnect the electrical connections.
  2. When replacing the front floor console assembly, transfer all necessary components.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.