Removal Procedure

2012 Buick VeranoSECTION Removal Procedure
  1. Disconnect the battery. Refer to Battery Negative Cable Disconnection and Connection .
  2. Drain the fuel tank. Refer to Fuel Tank DrainingΒ .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Standard) .
  4. Fig 1: Fuel Feed Pipe, Connector & Rear Bracket Clip
    GM2373247Courtesy of GENERAL MOTORS COMPANY
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.