SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2011ENCLAVE CXL, FWDREPAIR AND DIAGNOSISENGINE PERFORMANCEIGNITION SYSTEMENGINE CONTROLS AND FUEL - 3.6L - REPAIR INSTRUCTIONSREPAIR INSTRUCTIONSFUEL PIPE SHIELD REPLACEMENT
2011 Buick Enclave CXL, FWD

Fuel Pipe Shield Replacement

2011 Buick Enclave CXL, FWDSECTION Fuel Pipe Shield Replacement
Fig 1: View Of Fuel Pipe Shield
GM2180894Courtesy of GENERAL MOTORS CORP.
Fuel Pipe Shield Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the fuel injection sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
1 Fuel Pump Shield Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
10Y (89 lb in)
2 Fuel Pump Shield
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.