Inflatable Restraint Passenger Presence System (PPS) Sensor

2010 Buick Lucerne CXL, 3.9 1SECTION Inflatable Restraint Passenger Presence System (PPS) Sensor
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Passenger Presence System (PPS) Sensor Connector End View
GM1424764Courtesy of GENERAL MOTORS COMPANY
Inflatable Restraint Passenger Presence System (PPS) Sensor

Pin Wire Circuit Function
A 0.35 GY/D-GN 5609 Pressure Sensor Voltage Reference
B 0.35 YE 5608 Pressure Sensor Signal
C 0.35 GY 5610 Pressure Sensor Low Reference
Connector Part Information
  • Harness Type: Right Front Seat
  • OEM Connector: 15422250
  • Service Connector: 88987995
  • Description: 3-Way F GT 150 Series, Sealed (D-GY)
Terminal Part Information
  • Terminated Lead: Pending
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-2A (GY)
  • Terminal/Tray: 15326427/5
  • Core/Insulation Crimp: E/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.