Inflatable Restraint Front End Sensor - Right

2010 Buick Lucerne CXL, 3.9 1SECTION Inflatable Restraint Front End Sensor - Right
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Front End Sensor - Right Connector End View
GM744046Courtesy of GENERAL MOTORS COMPANY
Inflatable Restraint Front End Sensor - Right

Pin Wire Circuit Function
A 0.5 D-GN 1409 Right Front Discriminating Sensor Signal
B 0.5 GY/RD 5600 Right Front Discriminating Low Reference
Connector Part Information
  • Harness Type: Forward Lamp
  • OEM Connector: 15356723
  • Service Connector: 15306439
  • Description: 2-Way F GT 150 Series, Sealed (YE)
Terminal Part Information
  • Terminated Lead: 12191818
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-2A (GY)
  • Terminal/Tray: 12191819/8
  • Core/Insulation Crimp: E/1
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.