SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2010LUCERNE CXL, 3.9 1REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 247 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - RADIO ANTENNA MODULE THROUGH YAW SENSOR)COMPONENT CONNECTOR END VIEWSSTEERING WHEEL CONTROL SWITCH - LEFT
2010 Buick Lucerne CXL, 3.9 1

Steering Wheel Control Switch - Left

2010 Buick Lucerne CXL, 3.9 1SECTION Steering Wheel Control Switch - Left
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Steering Wheel Control Switch - Left Connector End View
GM1399235Courtesy of GENERAL MOTORS COMPANY
Steering Wheel Control Switch - Left

Pin Wire Circuit Function
1 0.35 PU 1375 Remote Radio Control Head Accessory Supply Voltage
2 0.35 YE 5883 Heated Steering Wheel Switch Supply Voltage (NR7/N57/N30/N50)
3 0.35 GY 1884 Cruise Control Set/Cruise and Resume/Accelerate Switch Signal
4 0.35 WH 5884 Indicator Control
5 0.35 OG 397 Cruise Control On Switch Signal (N57/N50/K59)
6 0.35 PU/WH 1381 LCD Dimming Signal
7 - - Not Used
8 0.35 BK 350 Ground
9 D-GN/WH 7158 Cruise Control Indicator Dimming Signal
10 - - Not Used
Connector Part Information
  • Harness Type: Steering Wheel
  • OEM Connector: 30700-1100
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 10-Way F H-DAC 64 Series (GY)
Terminal Part Information
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.