Radio Antenna Module (B9Q)

2010 Buick Lucerne CXL, 3.9 1SECTION Radio Antenna Module (B9Q)
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Digital Radio Antenna Module (BQ9) Connector End View
GM333042Courtesy of GENERAL MOTORS COMPANY
Radio Antenna Module (B9Q)

Pin Wire Circuit Function
A 0.8 PK/TN 3240 Battery Positive Voltage
B 0.5 PK 5165 Antenna 14-Volt Switched Supply Voltage
C 0.8 BK 450 Ground
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 12020013
  • Service Connector: 12102668
  • Description: 3-Way F Mixed Series (GY)
Terminal Part Information
  • Pins: A, C
  • Terminated Lead: Pending
  • Release Tool: J-38125-11A
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 12034046/2
  • Core/Insulation Crimp: E/A
  • Pin: B
  • Terminated Lead: Pending
  • Release Tool: J-38125-11A
  • Diagnostic Test Probe: J-35616-40 (BU)
  • Terminal/Tray: 12015860/4
  • Core/Insulation Crimp: E/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.