Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2010LUCERNE CXL, 3.9 1REPAIR AND DIAGNOSISELECTRICALMOTORS, SWITCHES, RELAYSWIRING SYSTEMS AND POWER MANAGEMENT - SPECIFICATIONSSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2010 Buick Lucerne CXL, 3.9 1
Fastener Tightening Specifications
2010 Buick Lucerne CXL, 3.9 1SECTION Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Ignition and Lock Switch Bolt | 1.5 N.m | 13 lb in |
| Ignition Lock Cylinder Case Bracket Bolt | 7 N.m | 62 lb in |
| Ignition Lock Cylinder Case Fasteners | 7 N.m | 62 lb in |
| Positive Battery Cable to Electrical Center Fastener | 15 N.m | 11 lb ft |
| Steering Column Trim Cover Lower Trim Fasteners | 3 N.m | 27 lb in |
| Steering Column Trim Cover Pan Fasteners | 3 N.m | 27 lb in |
| Steering Column Trim Cover Upper Trim Fasteners | 1.5 N.m | 13 lb in |
| Underhood Fuse Block Base to Body Fasteners | 9 N.m | 80 lb in |
| Underhood Fuse Block to Electrical Connections | 6.5 N.m | 58 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.