Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2010LUCERNE CXL, 3.9 1REPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMINTERIOR TRIM SYSTEM AND PANELINGSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2010 Buick Lucerne CXL, 3.9 1
Fastener Tightening Specifications
2010 Buick Lucerne CXL, 3.9 1SECTION Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Assist Handle Screw | 9 N.m | 80 lb in |
| Center Pillar Upper Trim Screw | 2 N.m | 18 lb in |
| Rear Window Panel Bolts | 6 N.m | 53 lb in |
| Sunshade Screws | 3 N.m | 25 lb in |
| Sunshade Anchor Screws | 3 N.m | 25 lb in |
| Quarter Upper Trim Panel Screw | 2 N.m | 18 lb in |
| Windshield Garnish Molding Screw | 9 N.m | 80 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.