SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 50 (SEAT BELT SYSTEM)REPAIR INSTRUCTIONSCHILD RESTRAINT TETHER ANCHOR REPLACEMENT
2006 Buick Terraza CXL, 3.5 L, AWD

Child Restraint Tether Anchor Replacement

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Child Restraint Tether Anchor Replacement
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Removal Procedure

    Fig 1: View Of Child Restraint Tether Brackets
    GM604202Courtesy of GENERAL MOTORS CORP.

  1. Remove the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.

  2. Slide the sound barrier out from under the upper quarter panel trim.
  3. Pull the sound barrier forward to access the tether bolts.
  4. Remove the child seat tether bracket to rear shelf bolts.
  5. Remove the child seat tether brackets from the rear shelf.

Installation Procedure

    Fig 2: View Of Child Restraint Tether Brackets
    GM604202Courtesy of GENERAL MOTORS CORP.
  1. Install the child seat tether brackets to the slots in the rear shelf.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the child seat tether bracket to rear shelf bolts.

    Tighten:  Tighten the child seat tether bracket to rear shelf bolts to 20 N.m (15 lb ft).

  3. Push the sound barrier back into its original position.
  4. Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.