Stationary Windows Connector End Views

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Stationary Windows Connector End Views
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Inside Rearview Mirror (UE1)

GM655810Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • OEM: 15324871 (Delphi)

    917981-2 (AMP)

  • Service: 15306351
  • 16-Way F 040 Hybrid I/O II Series (BK)
Pin Wire Color Circuit No. Function
1 - - Not Used
2 BARE 1705 Drain Wire
3-5 - - Not Used
6 OG 1732 Inadvertent Power Courtesy Lamp
7 - - Not Used
8 BK 750 Ground
9 L-GN 24 Backup Lamp Supply Voltage
10 GY 655 Cellular Microphone Signal
11 D-GN/WH 2514 Keypad Signal
12 L-GN/BK 2515 Keypad Supply Voltage
13 YE 643 Ignition 3 Voltage
14 YE/BK 2516 Keypad Green LED Signal
15 BN/WH 2517 Keypad Red LED Signal
16 - - Not Used
Rear Window Defogger Grid C1

GM365953Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • OEM: 12092133
  • Service: See Catalog
  • 1-Way F Metri-Pack 630 Series (BK)
Pin Wire Color Circuit No. Function
A BK 1927 Radio Antenna/Rear Window Defog Control Module Supply Voltage
Rear Window Defogger Grid C2

GM365953Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • OEM: 12092133
  • Service: See Catalog
  • 1-Way F Metri-Pack 630 Series (BK)
Pin Wire Color Circuit No. Function
A BK 1150 Ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.