Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 313 (SEAT BELT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Buick Terraza CXL, 3.5 L, AWD
Fastener Tightening Specifications
2006 Buick Terraza CXL, 3.5 L, AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Child Seat Tether Bracket Screws | 24 N.m | 18 lb ft |
| Front Seat Buckle Side Belt Nut | 42 N.m | 31 lb ft |
| Guide Loop Bolt | 42 N.m | 31 lb ft |
| Rear Seat Center Belt Nuts | 42 N.m | 31 lb ft |
| Seat Belt Buckle Anchor Bolt | 42 N.m | 31 lb ft |
| Seat Belt Buckle Anchor Nut | 42 N.m | 31 lb ft |
| Seat Belt D-Ring Bolt | 42 N.m | 31 lb ft |
| Seat Belt Retractor Anchor Plate Nut | 42 N.m | 31 lb ft |
| Seat Belt Retractor Bolt | 42 N.m | 31 lb ft |
| Shoulder Belt Anchor Plate Bolt | 42 N.m | 31 lb ft |
| Shoulder Belt Guide Adjuster Bracket Bolts | 42 N.m | 31 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.