SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 252 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSAUDIO AMPLIFIER C3 (UQ3)
2006 Buick Terraza CXL, 3.5 L, AWD

Audio Amplifier C3 (UQ3)

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Audio Amplifier C3 (UQ3)
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Audio Amplifier C3 (UQ3) Connector End Views
GM1653389Courtesy of GENERAL MOTORS CORP.
Audio Amplifier C3 (UQ3) Connector Parts Information

Connector Part Information 
  • OEM: 15491286
  • Service: 88988652
  • Description: 8-Way F Receptacle 2.8 (BK)
Terminal Part Information 
  • Pins: 2, 3, 6, 7
  • Terminal/Tray: 8100-4444/22
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: 4, 8
  • Terminal/Tray: 8100-4445/22
  • Core/Insulation Crimp: 4/4
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Audio Amplifier C3 (UQ3) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 - - Not Used
2 L-BU/BK 315 Right Subwoofer Speaker Output (-)
3 L-GN/BK 1794 Left Subwoofer Speaker Output (-)
4 RD/WH 640 Battery Positive Voltage
5 - - Not Used
6 D-GN 1795 Right Subwoofer Speaker Output (+)
7 D-BU/WH 346 Left Subwoofer Speaker Output (+)
8 BK/WH 851 Ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.