Fastener Tightening Specifications

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Outer Belt Sealing Strip Machine Screw, Front Door (Monte Carlo) 5 N.m 9 lb in
Outer Belt Sealing Strip Screw, Front Door (Impala) 2 N.m 18 lb in
Outer Belt Sealing Strip Screw, Front Door (Monte Carlo) 2 N.m 18 lb in
Outer Belt Sealing Strip Screw, Rear Door (Impala) 2 N.m 18 lb in
Weatherstrip Channel Screws, Front Door (Impala) 10 N.m 89 lb in
Weatherstrip Channel Screws, Front Door (Monte Carlo) 10 N.m 89 lb in
Window Regulator Bolts, Front Door (Impala) 10 N.m 89 lb in
Window Regulator Bolts, Front Door (Monte Carlo) 10 N.m 89 lb in
Window Regulator Bolts, Rear Door (Impala) 10 N.m 89 lb in
Window to Regulator Bolts, Front Door (Impala) 10 N.m 89 lb in
Window to Regulator Bolts, Front Door (Monte Carlo) 10 N.m 89 lb in
Window to Regulator Bolts, Rear Door (Impala) 10 N.m 89 lb in
Window Channel Retainer Screws, Front Door (Impala) 2 N.m 18 lb in
Window Channel Retainer Screws, Front Door (Monte Carlo) 2 N.m 18 lb in
Window Channel Retainer Screws, Rear Door (Impala) 2 N.m 18 lb in
Window Rear Channel Screws, Front Door 10 N.m 89 lb in
Window Regulator Motor 4.6 N.m 41 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.