SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 185 (SEAT SYSTEM)COMPONENT LOCATORPOWER SEAT SYSTEMS CONNECTORSHEATED SEAT CONTROL MODULE - DRIVER C2 (KA1)
2006 Buick Terraza CXL, 3.5 L, AWD

Heated Seat Control Module - Driver C2 (KA1)

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Heated Seat Control Module - Driver C2 (KA1)
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Connector End View
GM1653389Courtesy of GENERAL MOTORS CORP.
Power Seat Systems Connector End Views

Connector Part Information 
  • OEM: 15491286
  • Service: 88988652
  • Description: 8-Way F Receptacle 2.8 (BK)
Terminal Part Information 
  • Pins: 1, 2
  • Terminal/Tray: 8100-4444/22
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: 6, 8
  • Terminal/Tray: 8100-4443/22
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Heated Seat Control Module - Driver C2 (KA1)

Pin Wire Color Circuit No. Function
1 RD/WH 1440 Battery Positive Voltage
2 BK 550 Ground
3-5 - - Not Used
6 YE 2080 Driver Heated Seat Cushion Temperature Sensor Low Reference
7 - - Not Used
8 PK 2435 Passenger Heated Seat Cushion Temperature Sensor Low Reference
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.