Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 184 (INSTRUMENT PANEL SYSTEM DISPLAYS, GAUGES AND CONSOLE)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Buick Terraza CXL, 3.5 L, AWD
Fastener Tightening Specifications
2006 Buick Terraza CXL, 3.5 L, AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Floor Console Armrest Screws (GMX211) | 2 N.m | 18 lb in |
| Front Floor Console Armrest Hinge Screws (GMX211) | 2 N.m | 18 lb in |
| Front Floor Console Armrest Inner Screws (GMX211) | 2 N.m | 18 lb in |
| Front Floor Console Bolts/Screws (GMX211)&(GMX231) | 7 N.m | 62 lb in |
| Front Floor Console Bracket Bolts (GMX211)&(GMX231) | 10 N.m | 89 lb in |
| Front Floor Console Cupholder Screws (GMX211) | 2 N.m | 18 lb in |
| Front Floor Console Door Hinge Screws (GMX231) | 2 N.m | 18 lb in |
| Front Floor Console Door Inner Screws (GMX231) | 2 N.m | 18 lb in |
| Front Floor Console Door Screws (GMX231) | 2 N.m | 18 lb in |
| Front Floor Console Front Trim Plate Screws (GMX211) | 2 N.m | 18 lb in |
| Instrument Panel Carrier to Body Bolts (GMX211)&(GMX231) | 25 N.m | 18 lb ft |
| Instrument Panel Carrier to HVAC Module Bolts (GMX211)&(GMX231) | 4 N.m | 35 lb in |
| Instrument Panel Center Support Bracket Bolts (GMX211)&(GMX231) | 10 N.m | 89 lb in |
| Instrument Panel Cluster Assembly Screws (GMX211)&(GMX231) | 2 N.m | 18 lb in |
| Instrument Panel Compartment Screws (GMX231) | 2 N.m | 18 lb in |
| Instrument Panel Compartment Dampener Screws (GMX211) | 2 N.m | 18 lb in |
| Instrument Panel Compartment Inner Panel Screws (GMX211)&(GMX231) | 2 N.m | 18 lb in |
| Instrument Panel Compartment Latch Screws (GMX211)&(GMX231) | 2 N.m | 18 lb in |
| Instrument Panel Compartment Striker Screws (GMX231) | 2 N.m | 18 lb in |
| Instrument Panel Lower Center Trim Panel Screws (GMX231) | 2 N.m | 18 lb in |
| Instrument Panel Lower Trim Panel Bolts/Screws (GMX211) | 2 N.m | 18 lb in |
| Instrument Panel Trim Plate Screws (GMX211) | 2 N.m | 18 lb in |
| Instrument Panel Upper Trim Pad Bolts/Screws (GMX211)&(GMX231) | 2 N.m | 18 lb in |
| Knee Bolster Bracket to Carrier Bolts (GMX211)&(GMX231) | 10 N.m | 89 lb in |
| Knee Bolster Bracket to HVAC Module Bolts (GMX211)&(GMX231) | 4 N.m | 35 lb in |
| Knee Bolster Reinforcement Bolts (GMX211)&(GMX231) | 2 N.m | 18 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.