Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 18 (ENGINE CONTROL SYSTEM - 3.6L (LY7) - INTRODUCTION (2 OF 2))COMPONENT LOCATORENGINE CONTROLS CONNECTOR END VIEWS
2006 Buick Terraza CXL, 3.5 L, AWD
Engine Controls Connector End Views
2006 Buick Terraza CXL, 3.5 L, AWDSECTION Engine Controls Connector End Views
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Accelerator Pedal Position (APP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PU | 1272 | Low Reference |
| B | L-BU | 1162 | APP Sensor 2 Signal |
| C | TN | 1274 | 5-Volt Reference |
| D | BN | 1271 | Low Reference |
| E | D-BU | 1161 | APP Sensor 1 Signal |
| F | WH/BK | 1164 | 5-Volt Reference |
Camshaft Position (CMP) Actuator Solenoid Exhaust Bank 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 5293 | Ignition 1 Voltage |
| 2 | L-GN | 5282 | CMP Actuator Solenoid Control Exhaust Bank 1 |
Camshaft Position (CMP) Actuator Solenoid Intake Bank 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 5293 | Ignition 1 Voltage |
| 2 | PU | 5284 | CMP Actuator Solenoid Control Intake Bank 1 |
Camshaft Position (CMP) Actuator Solenoid Exhaust Bank 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 5293 | Ignition 1 Voltage |
| 2 | WH/BK | 5283 | CMP Actuator Solenoid Control Exhaust Bank 2 |
Camshaft Position (CMP) Actuator Solenoid Intake Bank 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 5293 | Ignition 1 Voltage |
| 2 | OG/BK | 5272 | CMP Actuator Solenoid Control Intake Bank 2 |
Camshaft Position (CMP) Sensor Bank 1 Exhaust
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | TN | 470 | Low Reference |
| 2 | D-GN | 5273 | CMP Sensor Signal Exhaust Bank 1 |
| 3 | GY | 705 | 5-Volt Reference |
Camshaft Position (CMP) Sensor Bank 1 Intake
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | TN | 470 | Low Reference |
| 2 | OG | 5275 | CMP Sensor Signal Intake Bank 1 |
| 3 | GY | 705 | 5-Volt Reference |
Camshaft Position (CMP) Sensor Bank 2 Exhaust
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | TN | 470 | Low Reference |
| 2 | PU | 5274 | CMP Sensor Signal Exhaust Bank 2 |
| 3 | GY | 705 | 5-Volt Reference |
Camshaft Position (CMP) Sensor Bank 2 Intake
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | TN | 470 | Low Reference |
| 2 | YE | 5276 | CMP Sensor Signal Intake Bank 2 |
| 3 | GY | 705 | 5-Volt Reference |
Crankshaft Position (CKP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PU/WH | 5024 | Low Reference |
| 2 | WH/BK | 5039 | CKP Sensor Signal |
Engine Coolant Temperature (ECT) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | YE | 410 | ECT Sensor Signal |
| 2 | TN | 470 | Low Reference |
Evaporative Emission (EVAP) Canister Purge Solenoid Valve
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PK/BK | 5293 | Ignition 1 Voltage |
| 2 | D-GN/WH | 428 | EVAP Canister Purge Solenoid Valve Control |
Evaporative Emission (EVAP) Canister Vent Solenoid Valve
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG | 2840 | Battery Positive Voltage |
| B | WH | 1310 | EVAP Canister Vent Solenoid Control |
Fuel Injector 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 5291 | Ignition 1 Voltage |
| B | TN | 1744 | Fuel Injector 1 Control |
Fuel Injector 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 5292 | Ignition 1 Voltage |
| B | L-GN/BK | 1745 | Fuel Injector 2 Control |
Fuel Injector 3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 5291 | Ignition 1 Voltage |
| B | PK/BK | 1746 | Fuel Injector 3 Control |
Fuel Injector 4
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 5292 | Ignition 1 Voltage |
| B | L-BU/BK | 844 | Fuel Injector 4 Control |
Fuel Injector 5
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 5291 | Ignition 1 Voltage |
| B | TN/WH | 845 | Fuel Injector 5 Control |
Fuel Injector 6
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 5292 | Ignition 1 Voltage |
| B | YE/BK | 846 | Fuel Injector 6 Control |
Fuel Pump and Sender Assembly
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 1850 | Ground |
| B | PU | 30 | Fuel Level Sensor Signal |
| C | BK/WH | 651 | Signal Ground |
| D | GY | 120 | Fuel Pump Supply Voltage |
Fuel Tank Pressure Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG/BK | 469 | Low Reference |
| B | D-GN | 890 | Fuel Tank Pressure Sensor Signal |
| C | GY | 416 | 5-Volt Reference |
Heated Oxygen Sensor (HO2S) 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PU/WH | 1665 | HO2S High Signal |
| 2 | WH | 5279 | HO2S Pump Current |
| 3 | PK/BK | 5293 | Ignition 1 Voltage |
| 4 | GY/WH | 3113 | HO2S Heater Low Control Sensor 1 |
| 5 | TN | 1664 | HO2S Low Signal |
| 6 | L-GN | 5278 | HO2S Input Pump Current Sensor 1 |
Heated Oxygen Sensor (HO2S) 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/WH | 3121 | HO2S Low Signal |
| B | PU | 3120 | HO2S High Signal |
| C | - | - | Not Available |
| D | BK/WH | 3122 | HO2S Heater Low Control Sensor 2 |
| E | PK | 339 | Ignition 1 Voltage |
Ignition Coil 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PU | 2121 | Ignition Control 1 |
| 2 | PK/BK | 5291 | Ignition 1 Voltage |
| 3 | BK/WH | 1551 | Ground |
| 4 | BK | 1550 | Ground |
Ignition Coil 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | OG/WH | 2122 | Ignition Control 2 |
| 2 | PK/BK | 5292 | Ignition 1 Voltage |
| 3 | BK/WH | 151 | Ground |
| 4 | BK | 150 | Ground |
Ignition Coil 3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | L-BU | 2123 | Ignition Control 3 |
| 2 | PK/BK | 5291 | Ignition 1 Voltage |
| 3 | BK/WH | 1551 | Ground |
| 4 | BK | 1550 | Ground |
Ignition Coil 4
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-GN/WH | 2124 | Ignition Control 4 |
| 2 | PK/BK | 5292 | Ignition 1 Voltage |
| 3 | BK/WH | 151 | Ground |
| 4 | BK | 150 | Ground |
Ignition Coil 5
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-GN | 2125 | Ignition Control 5 |
| 2 | PK/BK | 5291 | Ignition 1 Voltage |
| 3 | BK/WH | 1551 | Ground |
| 4 | BK | 1550 | Ground |
Ignition Coil 6
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | L-BU/WH | 2126 | Ignition Control 6 |
| 2 | PK/BK | 5292 | Ignition 1 Voltage |
| 3 | BK/WH | 151 | Ground |
| 4 | BK | 150 | Ground |
Knock Sensor (KS) 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-BU | 496 | KS Signal Bank 1 |
| 2 | GY | 1716 | KS Low Reference Bank 1 |
Knock Sensor (KS) 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | L-BU | 1876 | KS Signal Bank 2 |
| 2 | TN | 407 | KS Low Reference Bank 2 |
Manifold Absolute Pressure (MAP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | GY | 605 | 5-Volt Reference |
| 2 | TN | 470 | Low Reference |
| 3 | OG/BK | 5266 | MAP Sensor Signal |
Mass Airflow (MAF)/Intake Air Temperature (IAT) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | TN | 472 | IAT Sensor Signal |
| 2 | PK | 339 | Ignition 1 Voltage |
| 3 | BK | 2760 | Low Reference |
| 4 | GY | 2709 | 5-Volt Reference |
| 5 | YE | 492 | MAF Sensor Signal |
Throttle Actuator Control (TAC) Module
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-GN | 485 | TP Sensor 1 Signal |
| 2 | GY | 2701 | 5-Volt Reference |
| 3 | BN | 582 | TAC Motor Control 2 |
| 4 | PU | 486 | TP Sensor 2 Signal |
| 5 | YE | 581 | TAC Motor Control 1 |
| 6 | TN | 2752 | Low Reference |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.