SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 176 (ENTERTAINMENT SYSTEMS)COMPONENT LOCATORENTERTAINMENT CONNECTORSRADIO C2
2006 Buick Terraza CXL, 3.5 L, AWD

Radio C2

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Radio C2
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Connector End View
GM850856Courtesy of GENERAL MOTORS CORP.
Entertainment Connector End Views

Connector Part Information 
  • OEM: 15416970
  • Service: See Catalog
  • Description: 16-Way F Micro 64 Modular (BK)
Terminal Part Information 
  • Pins: 1, 2, 7, 8, 9, 10, 11, 15, 5, 6, 13, 14
  • Terminal/Tray: 15359541/4
  • Core/Insulation Crimp: Pins 1, 2, 7, 8, 9, 10, 11, 15 - M/M
  • Core/Insulation Crimp: Pins 5, 6, 13, 14 - See Terminal Repair Kit
  • Release Tool/Test Probe: 15381651-2/J-35616-64A (L-BU)
Radio C2

Pin Wire Color Circuit No. Function
1 BN/WH 367 Remote Radio Left Audio Signal
2 D-GN/WH 368 Remote Radio Right Audio Signal
3-4 - - Not Used
5 BN 199 Left Rear Speaker Output (+)
6 D-BU 46 Right Rear Speaker Output (+)
7 OG/BK 1406 Remote Playback Device Left Audio Signal
8 OG 5748 TBD
9 L-GN 7007 TBD
10 GY/BK 7008 TBD
11 - 814 Drain Wire
12 - - Not Used
13 YE 116 Left Rear Speaker Output (-)
14 L-BU 115 Right Rear Speaker Output (-)
15 L-BU 1405 Remote Playback Device Audio Common Signal
16 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.