Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 174 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Buick Terraza CXL, 3.5 L, AWD
Fastener Tightening Specifications
2006 Buick Terraza CXL, 3.5 L, AWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Armrest Pull Cup Screws (Impala) | 6 N.m | 53 lb in |
| Cone Adjuster Hinge Bolts (Monte Carlo) | 10 N.m | 89 lb in |
| Door Armrest Bracket Screws (All) | 10 N.m | 89 lb in |
| Door Check Link (All) | 25 N.m | 18 lb ft |
| Door Front Pull Handle Screws (Monte Carlo) | 4 N.m | 36 lb ft |
| Door Front Trim Panel Upper Screw (Impala) | 2 N.m | 18 lb in |
| Door Front Trim Panel Upper Screw (Monte Carlo) | 2 N.m | 18 lb in |
| Door Hinge Bolts (All) | 33 N.m | 24 lb ft |
| Door Hinge Keeper Strap Bolts | 33 N.m | 24 lb ft |
| Door Inside Handle Bezel Screw (Impala) | 2 N.m | 18 lb in |
| Door Inside Handle Bezel Screw (Monte Carlo) | 2 N.m | 18 lb in |
| Door Lock Striker Screws (All) | 25 N.m | 18 lb ft |
| Door Rear Energy Absorbers Pad Screw (Impala) | 2 N.m | 18 lb in |
| Front Door Lock Actuator Screws | 2 N.m | 18 lb in |
| Intermediate Door Hinge Bolts | 33 N.m | 24 lb ft |
| Lock Screws, Front Door (Impala) | 10 N.m | 89 lb in |
| Lock Screws, Front Door (Monte Carlo) | 10 N.m | 89 lb in |
| Lock Screws, Rear Door (Impala) | 10 N.m | 89 lb in |
| Outer Belt Sealing Strip Machine Screw, Front Door (Monte Carlo) | 5 N.m | 9 lb in |
| Outer Belt Sealing Strip Screw, Front Door (Impala) | 2 N.m | 18 lb in |
| Outer Belt Sealing Strip Screw, Front Door (Monte Carlo) | 2 N.m | 18 lb in |
| Outer Belt Sealing Strip Screw, Rear Door (Impala) | 2 N.m | 18 lb in |
| Outside Handle Bolts, Front Door (Impala) | 10 N.m | 89 lb in |
| Outside Handle Bolts, Front Door (Monte Carlo) | 10 N.m | 89 lb in |
| Outside Handle Bolts, Rear Door (Impala) | 10 N.m | 89 lb in |
| Outside Mirror Nuts (All) | 10 N.m | 89 lb in |
| Rear Door Lock Actuator Screws | 2 N.m | 18 lb in |
| TORX® Body Side Hinge Bolts (Monte Carlo) | 10 N.m | 89 lb in |
| Weatherstrip Channel Screws, Front Door (Impala) | 10 N.m | 89 lb in |
| Weatherstrip Channel Screws, Front Door (Monte Carlo) | 10 N.m | 89 lb in |
| Window Regulator Bolts, Front Door (Impala) | 10 N.m | 89 lb in |
| Window Regulator Bolts, Front Door (Monte Carlo) | 10 N.m | 89 lb in |
| Window Regulator Bolts, Rear Door (Impala) | 10 N.m | 89 lb in |
| Window to Regulator Bolts, Front Door (Impala) | 10 N.m | 89 lb in |
| Window to Regulator Bolts, Front Door (Monte Carlo) | 10 N.m | 89 lb in |
| Window to Regulator Bolts, Rear Door (Impala) | 10 N.m | 89 lb in |
| Window Channel Retainer Screws, Front Door (Impala) | 2 N.m | 18 lb in |
| Window Channel Retainer Screws, Front Door (Monte Carlo) | 2 N.m | 18 lb in |
| Window Channel Retainer Screws, Rear Door (Impala) | 2 N.m | 18 lb in |
| Window Rear Channel Screws, Front Door | 10 N.m | 89 lb in |
| Window Regulator Motor | 4.6 N.m | 41 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.