Backup Lamp Bulb Replacement

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Backup Lamp Bulb Replacement
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Replacing Backup Lamp Bulb
GM1612123Courtesy of GENERAL MOTORS CORP.
Backup Lamp Bulb Replacement

Callout Component Name
Fastener Tightening Specifications:Β  Refer to Fastener Tightening SpecificationsΒ .
Preliminary Procedure:Β 
Remove either the LR or RR tail lamp assembly. Refer to Tail Lamp Replacement (Monte Carlo)Β  or Tail Lamp Replacement (Impala)Β .
1 Socket, Reverse Lamp Bulb
Tip:Β  Twist the socket counterclockwise a quarter turn to remove.
2 Bulb, Reverse Lamp
Tip:Β  Pull outward on the bulb in order to replace.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.