Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 144 (REAR SUSPENSION SYSTEM)REPAIR INSTRUCTIONSSUPPORT REPLACEMENTREMOVAL PROCEDURE
2006 Buick Terraza CXL, 3.5 L, AWD
Removal Procedure
2006 Buick Terraza CXL, 3.5 L, AWDSECTION Removal Procedure
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the rear tires and wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Remove the exhaust pipe. Refer to Muffler Replacement in Engine Exhaust.
- Disconnect the brake lines from the rear suspension support. Refer to Brake Hose Replacement - Rear in Hydraulic Brakes.
- Disconnect the parking brake cables and tensioner from the suspension support. Refer to Park Brake Cable Replacement - Left Rear and Park Brake Cable Replacement - Right Rear in Park Brake.
- Remove the stabilizer shaft from the rear suspension support. Refer to Stabilizer Shaft Replacement .IMPORTANT: Support the rear suspension support with jack stands before removing the mounting bolts.
- Remove the rear wheel spindle rod bolts from the knuckle.
- Remove the rear suspension support mounting bolts.
- Remove the rear suspension support.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.