Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSREMOTE CONTROL REPLACEMENT - SIT-N-LIFTREMOVAL PROCEDURE

2006 Buick Terraza CXL, 3.5 L, AWD

Removal Procedure

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Removal Procedure

Fig 1: View Of Right Side Upper Trim Panel

GM1368170

Courtesy of GENERAL MOTORS CORP.

Remove the right side upper trim panel from the seat base.
Remove the rear trim panel from the seat base.

Fig 2: Locating Electrical Connector

GM1368543

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector from the seat base.

Fig 3: View Of Remote Control

GM1368565

Courtesy of GENERAL MOTORS CORP.

Remove the remote control and the chord from the vehicle.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.