SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSBUICK2006TERRAZA CXL, 3.5 L, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALBODY ELECTRICALOEM CONNECTOR END VIEWSENGINE CONTROL MODULE (ECM) CONNECTOR END VIEWSENGINE CONTROL MODULE (ECM) CONNECTOR END VIEW C1
2006 Buick Terraza CXL, 3.5 L, AWD

Engine Control Module (ECM) Connector End View C1

2006 Buick Terraza CXL, 3.5 L, AWDSECTION Engine Control Module (ECM) Connector End View C1
Fig 1: Powertrain Control Module (PCM) C1 & C3 Connector End View
GM1228485Courtesy of GENERAL MOTORS CORP.
Engine Control Module (ECM) Connector End Views

Connector Part Information 
  • OEM: 13510837
  • Service: See Catalog
  • Description: 56-Way F Micro-Pack 64 Series Sealed (BK)
Terminal Part Information 
  • Pins: 9, 12-13, 15, 18-19, 29, 33-37, 40, 44, 47-49, 53-56
  • Terminal/Tray: 33467-0003/23
  • Core/Insulation Crimp: H/H
  • Release Tool/Test Probe: J-38125-213/J-35616-64A (L-BU)
  • Pins: 7, 20, 39
  • Terminal/Tray: 33467-0005/23
  • Core/Insulation Crimp: Pins 7, 39 - J/J
  • Core/Insulation Crimp: Pins 20 - K/K
  • Release Tool/Test Probe: J-38125-213/J-35616-64A (L-BU)
Engine Control Module (ECM) C1

Pin Wire Color Circuit No. Function
1-6 - - Not Used
7 L-GN 526 Stop Lamp Supply Voltage
8 - - Not Used
9 TN 2759 Low Reference
10-11 - - Not Used
12 BN/WH 419 MIL Control
13 D-GN/WH 465 Fuel Pump Relay Control
14 - - Not Used
15 D-GN 1049 Class 2 Serial Data
16-17 - - Not Used
18 BN 1141 Ignition 3 Voltage
19 PK 439 Ignition 1 Voltage
20 RD/WH 540 Battery Positive Voltage
21-28 - - Not Used
29 GY 1884 Cruise Control Switch Signal
30-32 - - Not Used
33 WH/BK 1164 5-Volt Reference
34 GY 2709 5-Volt Reference
35 TN 1274 5-Volt Reference
36 BN 1271 Low Reference
37 PU 1272 Low Reference
38 - - Not Used
39 D-GN 389 Vehicle Speed Signal
40 BN 5069 Powertrain Relay Control
41-43 - - Not Used
44 PU 1589 Fuel Level Sensor Signal
45-46 - - Not Used
47 D-BU 1161 APP Sensor 1 Signal
48 D-GN 890 Fuel Tank Pressure Sensor Signal
49 L-BU 1162 APP Sensor 2 Signal
50-52 - - Not Used
53 D-GN/WH 459 A/C Compressor Clutch Relay Control
54 D-BU 473 High Speed Cooling Fan Relay Control
55 WH 1310 EVAP Canister Vent Solenoid Control
56 YE/BK 625 Starter Enable Relay Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.