SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2006ALLURE CXSREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL & STEERING COLUMNSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Buick Allure CXS

Fastener Tightening Specifications

2006 Buick Allure CXSSECTION Fastener Tightening Specifications
Fastener Tightening Specifications

Application Specification
Metric English
Ignition Lock Cylinder Case Screws 7 N.m 62 lb in
Ignition Switch Assembly Screws 1.5 N.m 13 lb in
Intermediate Shaft Seal Bolts 3 N.m 27 lb in
Intermediate Shaft to the Steering Column Pinch Bolt 48 N.m 35 lb ft
Intermediate Shaft to the Steering Gear Pinch Bolt 48 N.m 35 lb ft
Linear Shift Assembly to Steering Column Mounting Screws 10 N.m 89 lb in
Shift Lever Screw 20 N.m 15 lb ft
Steering Column Mounting Bolts (Tighten in Sequence) 24 N.m 18 lb ft
Steering Column Support Assembly TORX® Head Screws 17 N.m 13 lb ft
Steering Column Trim Cover Screws Lower 3.5 N.m 31 lb in
Steering Column Trim Cover Screws Upper 1.5 N.m 13 lb in
Steering Wheel Nut 41 N.m 30 lb ft
Steering Wheel Theft Deterrent Lock 1.5 N.m 13 lb in
Turn Signal Multifunction Switch Screws Side 7 N.m 62 lb in
Turn Signal Multifunction Switch Screws Top 3 N.m 27 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.