Seat Back Cover Replacement - Front

2006 Buick Allure CXSSECTION Seat Back Cover Replacement - Front
Fig 1: View Of Back Seat Back Cover Components
GM1633071Courtesy of GENERAL MOTORS CORP.
Seat Back Cover Replacement - Front

Callout Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices.
Fastener Tightening Specifications:Β  Refer to Fastener Tightening SpecificationsΒ .Preliminary Procedure:Β Remove the front bucket seat. Refer to Seat Replacement - Front BucketΒ .
1 Pocket, Seat Back Cushion
2 Retainer, Seat Back Cushion Pocket (Qty: 4)
3 Panel, Seat Back Cushion
Tip:Β  Pull from the bottom edge of the panel to remove.
4 Retainer Clip, Seat Back Cushion Panel (Qty: 2)
5 Head Restraint Assembly
Tip:Β  Push in the button on the head restraint guides to release the head restraint from the seat.
6 Guide, Head Restraint (Qty: 2)
Tip:Β  Squeeze the bottom of the guide and push upward to remove.
7 Cover, Seat Back Cushion
Tip:Β  Remove the hog rings that attach the seat cushion cover to the seat cushion.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.