Seat Cushion Frame Replacement - Front

2006 Buick Allure CXSSECTION Seat Cushion Frame Replacement - Front
Fig 1: View Of Front Seat Cushion Frame Components
GM1633068Courtesy of GENERAL MOTORS CORP.
Seat Cushion Frame Replacement - Front

Callout Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices.
Fastener Tightening Specifications:Β  Refer to Fastener Tightening SpecificationsΒ .

Preliminary Procedures

  1. Remove the front bucket seat. Refer to Seat Replacement - Front BucketΒ .
  2. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Rezeroing Procedure .
1 Handle, Seat Recliner
Refer to Seat Back Recliner Handle Replacement - FrontΒ .
2 Cover, Seat Adjuster Finish Cover
Refer to Seat Adjuster Track Cover Replacement - FrontΒ .
3 Cover, Seat Cushion
Refer to Seat Cushion Cover Replacement - FrontΒ .
4 Heater Assembly, Seat Cushion
Tip:Β  Disconnect the electrical connector.
5 Pad, Seat Cushion
6 Bolt, Seat Cushion (Qty: 4)

Tighten:Β  25 N.m (18 lb ft)

7 Frame Assembly, Seat Cushion
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.