Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2005LESABRE LIMITED, 4T65E/M15REPAIR AND DIAGNOSISENGINE MECHANICALSTARTERBATTERY, CHARGING SYSTEM AND STARTING SYSTEMSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS (L36)
2005 Buick LeSabre Limited, 4T65E/M15
Fastener Tightening Specifications (L36)
2005 Buick LeSabre Limited, 4T65E/M15SECTION Fastener Tightening Specifications (L36)
Fastener Tightening Specifications (L36)
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Cable Bolt | 17 N.m | 13 lb ft |
| Battery Cable to Rear Fuse Block Nut | 15 N.m | 11 lb ft |
| Battery Cable to Underhood Fuse Block Nut | 15 N.m | 11 lb ft |
| Battery Negative Cable to Floor Pan Bolt | 36 N.m | 27 lb ft |
| Battery Positive Cable to Starter Nut | 10 N.m | 89 lb in |
| Battery Retainer Bolt | 17 N.m | 13 lb ft |
| Generator Brace Bolt (L36) | 25 N.m | 18 lb ft |
| Generator Brace Bolt (L67) | 30 N.m | 22 lb ft |
| Generator Brace Nut | 50 N.m | 37 lb ft |
| Generator Mounting Bolt | 50 N.m | 37 lb ft |
| Generator Output BAT Terminal Nut | 12.5 N.m | 111 lb in |
| Solenoid S Terminal Nut | 2.5 N.m | 22 lb in |
| Starter Motor Mounting Bolt | 43 N.m | 32 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.