Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSBUICK2005LESABRE LIMITED, 4T65E/M15REPAIR AND DIAGNOSISBODY & FRAMEWINDOWSSTATIONARY WINDOW SYSTEMDESCRIPTION AND OPERATIONCOMPASS CALIBRATION AND VARIANCE PROCEDURECOMPASS MAGNETIC VARIATION ADJUSTMENT
2005 Buick LeSabre Limited, 4T65E/M15
Compass Magnetic Variation Adjustment
2005 Buick LeSabre Limited, 4T65E/M15SECTION Compass Magnetic Variation Adjustment
Magnetic variation adjustments are required when the compass displays a constant error in heading. Variation is the difference between magnetic north and true north due to geographical location.
- Locate your current geographic location on the World Magnetic Variation Map.
- Turn ON the ignition, with the engine OFF.
- Press and hold the switch for the compass, which may be depicted as COMP, COMPASS, or on/off (w/UE1) depending on the type of mirror on the vehicle, until a zone number appears on the compass display.
- Depress the switch for the compass to select the desired zone number.
- Wait 5 seconds. The display will return to a compass heading. The variance procedure is now complete.
- Calibrate the compass. Refer to Compass Calibration mentioned above.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.