Quick Lookups: Fluids

2005 Buick LeSabre Limited, 4T65E/M15SECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 9.00 OZS. 0.26 L PAG 150 S
Air Cond Refrigerant 2.20 LBS. 0.99 KG R-134a S
Automatic Transmission Fluid Overhaul 10.00 QTS. 9.46 L Automatic Transmission Fluid DEXRON VI Look for "Approved for H-Specification" on the label. Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Pan Removal and Replacement 7.40 QTS. 7 L Automatic Transmission Fluid DEXRON VI Look for "Approved for H-Specification" on the label. Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant 10.00 QTS. 9.46 L 50/50 mixture of DEX-COOL and clean drinkable water S
Engine Oil w/Filter 4.50 QTS. 4.25 L API - SAE 5W-30 Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. S
Engine Oil w/o Filter 4.00 QTS. 3.78 L API - SAE 5W-30 Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. S
Fuel Tank 18.50 GALS. 70.03 L S
Power Steering Fluid 1.00 QTS. 0.94 L GM Power Steering Fluid GM Part No. 89021184. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.