Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2004RAINIER AWD V8-5.3L VIN PREPAIR AND DIAGNOSISSTARTING AND CHARGINGSPECIFICATIONS
2004 Buick Rainier AWD V8-5.3L VIN P
Starting and Charging: Specifications
2004 Buick Rainier AWD V8-5.3L VIN PSECTION Specifications
Fastener Tightening Specifications
Air Conditioning Line Bracket Bolt (4.2L) 10 Nm (89 lb in)
Battery Cable Channel Bolt (5.3L) 12 Nm (106 lb in)
Battery Hold Down Retainer Nut 15 Nm (11 lb ft)
Battery Negative Cable 15 Nm (11 lb ft)
Battery Positive Cable 15 Nm (11 lb ft)
Battery Positive Cable Lead to Starter Nut 9 Nm (80 lb in)
Battery Tray Bolt 20 Nm (15 lb ft)
Battery Tray Brace Bolt 10 Nm (89 lb in)
Engine Harness to Engine Block Bolt (4.2L) 50 Nm (37 lb)
Engine Harness to Shock Tower Bolt (4.2L) 10 Nm (89 lb in)
Engine Harness to Wheelhouse Panel Bolt (4.2L) 10 Nm (89 lb in)
Engine Lift Hook Bolt (4.2L) 50 Nm (37 lb ft)
Generator Bolt 50 Nm (37 lb ft)
Generator Bracket Bolt (5.3L) 50 Nm (37 lb ft)
Generator Cable Nut 9 Nm (80 lb in)
Ground Cable to Shock Tower Bolt (5.3L) 10 Nm (89 lb in)
Ground Terminal to Engine Block Bolt (5.3L) 50 Nm (37 lb ft)
Ground Terminal to Front Fender Bolt (5.3L) 10 Nm (89 lb in)
Positive Terminal to Underhood Junction Block Bolt 10 Nm (89 lb in)
Starter Bolt 50 Nm (37 lb ft)
Starter Solenoid Nut 3.4 Nm (30 lb in)
Transmission Cover Bolt (5.3L) 9 Nm (80 lb in)
Air Conditioning Line Bracket Bolt (4.2L) 10 Nm (89 lb in)
Battery Cable Channel Bolt (5.3L) 12 Nm (106 lb in)
Battery Hold Down Retainer Nut 15 Nm (11 lb ft)
Battery Negative Cable 15 Nm (11 lb ft)
Battery Positive Cable 15 Nm (11 lb ft)
Battery Positive Cable Lead to Starter Nut 9 Nm (80 lb in)
Battery Tray Bolt 20 Nm (15 lb ft)
Battery Tray Brace Bolt 10 Nm (89 lb in)
Engine Harness to Engine Block Bolt (4.2L) 50 Nm (37 lb)
Engine Harness to Shock Tower Bolt (4.2L) 10 Nm (89 lb in)
Engine Harness to Wheelhouse Panel Bolt (4.2L) 10 Nm (89 lb in)
Engine Lift Hook Bolt (4.2L) 50 Nm (37 lb ft)
Generator Bolt 50 Nm (37 lb ft)
Generator Bracket Bolt (5.3L) 50 Nm (37 lb ft)
Generator Cable Nut 9 Nm (80 lb in)
Ground Cable to Shock Tower Bolt (5.3L) 10 Nm (89 lb in)
Ground Terminal to Engine Block Bolt (5.3L) 50 Nm (37 lb ft)
Ground Terminal to Front Fender Bolt (5.3L) 10 Nm (89 lb in)
Positive Terminal to Underhood Junction Block Bolt 10 Nm (89 lb in)
Starter Bolt 50 Nm (37 lb ft)
Starter Solenoid Nut 3.4 Nm (30 lb in)
Transmission Cover Bolt (5.3L) 9 Nm (80 lb in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.