Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2000PARK AVENUE BASE, 3.8 KREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXPOWER WINDOW DTCS
2000 Buick Park Avenue Base, 3.8 K
Power Window DTCS
2000 Buick Park Avenue Base, 3.8 KSECTION Power Window DTCS
POWER WINDOW DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| B2200 | Left Front Window Switch Stuck In Up Position |
| B2201 | Left Front Window Switch Stuck In Down Position |
| B2202 | Right Front Window Switch Stuck In Up Position |
| B2203 | Right Front Window Switch Stuck In Down Position |
| B2204 | Left Rear Window Switch Stuck In Up Position |
| B2205 | Left Rear Window Switch Stuck In Down Position |
| B2206 | Right Rear Window Switch Stuck In Up Position |
| B2207 | Right Rear Window Switch Stuck In Down Position |
| B2208 | Express Window Contact Shorted To Ground |
| B2212 | Right Front Switch On Left Front Door Stuck In Up Position |
| B2213 | Right Front Switch On Left Front Door Stuck In Down Position |
| B2214 | Left Rear Switch On Left Front Door Stuck In Up Position |
| B2215 | Left Rear Switch On Left Front Door Stuck In Down Position |
| B2216 | Right Rear Switch On Left Front Door Stuck In Up Position |
| B2217 | Right Rear Switch On Left Front Door Stuck In Down Position |
| U1161 | Loss Of PDM Serial Data |
| U1162 | Loss Of RDM Serial Data |
| U1170 | Loss Of Driver Door Switch Assembly Serial Data |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.