Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2000PARK AVENUE BASE, 3.8 KREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSREMOTE KEYLESS ENTRY SYSTEMSPROGRAMMING PROCEDURESDRIVER INFORMATION CENTER PROGRAMMING
2000 Buick Park Avenue Base, 3.8 K
Driver Information Center Programming
2000 Buick Park Avenue Base, 3.8 KSECTION Driver Information Center Programming
If vehicle is equipped with Driver Information Center (DIC), all personal programming options may changed through DIC. To enter programming mode, perform following:
- Turn ignition on, engine off. Keep transaxle in PARK position. Inform DIC which driver is to be programmed by pressing UNLOCK button on appropriate RKE transmitter.
- Press and hold ENG/MET button for 5 seconds, WELCOME TO BUICK OPTION FEATURE will appear in display. Next display is ARMREST BUTTON CHANGES DIVER #. DIC is now ready to program personal options.
- To change an option, use ENG/MET button to toggle between choices. Press RESET button to move to next feature. Pressing UNLOCK button on RKE transmitter will return to beginning of feature list. Turning ignition off or pressing any other button on DIC will exit programming mode.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.