Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory Seat & Mirrors
Remote Keyless Entry (RKE) transmitters can be programmed to allow activation of memory seat and mirrors to memory position No. 1, memory position No. 2, exit mode or disable memory feature. Perform the following steps to program memory seat and mirror positions for each RKE transmitter. Each RKE transmitter may be set for different memory position functions.
- Adjust seat and mirrors to desired positions. Press desired position (No. 1 or No. 2, use number on RKE transmitter) for more than 3 seconds (verified by 2 beeps).
- Adjust seat to desired exit position. Press EXIT button for more than 3 seconds (verified by 2 beeps). In DIC PERSONAL CHOICE FEATURES under SEAT RECALL select MEMORY or EXIT options.
To disable memory seat and mirror mode, turn off SEAT RECALL in DIC PERSONAL CHOICE FEATURES.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.