Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2000PARK AVENUE BASE, 3.8 1REPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEDOOR LOCKSREMOTE KEYLESS ENTRY SYSTEMSPROGRAMMING PROCEDURESPERIMETER LIGHTING
2000 Buick Park Avenue Base, 3.8 1
Perimeter Lighting
2000 Buick Park Avenue Base, 3.8 1SECTION Perimeter Lighting
Perimeter lighting feature illuminates headlights, park lights and backup lights when vehicle is unlocked using RKE transmitter. Perimeter lighting may be programmed for each RKE transmitter as follows:
NOTE:
This feature is only available in security feedback modes 1, 3 and 5.
- Hold power door LOCK switch down. Press RKE instant alarm button. Perimeter lighting is on and horn chirps twice to indicate perimeter lighting is enabled.
- Press RKE instant alarm button again. Perimeter lighting is off and horn will chirps once time to indicate perimeter lighting is disabled.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.