I/O Mode Feedback For Vehicles Equipped With Keyless Entry

1998 Buick LeSabre V6-3.8L VIN KSECTION I/O Mode Feedback For Vehicles Equipped With Keyless Entry

Mall Modules Audible Feedback:




For vehicles with keyless entry, the MALL module electrical schematic differs from that of vehicles without keyless entry. For vehicles with keyless entry, the audible feedback is different when activating the power door lock switch, trans axle gear selector, and keyless entry unlock (using the keyless entry transmitter). The chart describes the feedback for this case.

Note that for Pontiac vehicles, no bongs occur when shifting into the PARK position due to the ignition-OFF door unlock feature.

MALL Input/Output:




The table lists the MALL inputs and outputs that should be evaluated during the Input/Output (I/O) mode.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.