Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Using DIC Reset Button
1996 Buick Roadmaster BaseSECTION Using DIC Reset Button
- Turn ignition switch to OFF position.
- Ensure all tire pressures are adjusted to the pressure recommended on tire pressure label.
- Turn ignition ON with engine OFF.
- Press SELECT right arrow button until "GAGE" is displayed.
- Press SELECT down arrow button until "TIRE PRESSURE" is displayed.
- Press and hold RESET button until "TIRE PRESSURE RESET" is displayed.
- Release RESET button. DIC should display "TIRE PRESSURE NORMAL".
- After resetting, the TPM system requires up to 30 minutes of straight line driving in each of the following speed ranges to complete calibration process:
- 15-40 mph (24-64 km/h).
- 40-70 mph (64-113 km/h).
- 70-90 mph (113-145 km/h).
NOTE: The EBCM learns tire pressure calibration for each speed range independently. In Monitor Mode 1, EBCM has only partially learned tire pressure calibration for speed range and has limited detection capability for a tire pressure condition. In Monitor Mode 2, EBCM has fully learned tire pressure calibration for speed range and has full detection capability for a tire pressure condition.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.