Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Mode F1 (Code History)
Mode displays DTCs and description. EBCM keeps track of ignition cycles since DTC occurred. Ignition cycle information is useful in determining reason vehicle is in for service. If display indicates zero ignition cycles since DTC was set, fault is currently present. Vehicle speed information can be used to duplicate fault if an intermittent fault condition caused DTC to set. History information on up to 3 DTCs can be stored.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.