Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK1985ELECTRA V6-260 4.3L DSLREPAIR AND DIAGNOSISMAINTENANCEWHEELS AND TIRESTECHNICAL SERVICE BULLETINS
1985 Buick Electra V6-260 4.3L DSL
Wheels and Tires: Technical Service Bulletins
1985 Buick Electra V6-260 4.3L DSLSECTION Technical Service Bulletins
- Customer Interest
- Tires/Wheels - Vibration Shortly After Tires Are Mounted on Rim
- Tires/Wheels - Low Tire/Leaking Cast Aluminum Wheels
- Cast Aluminum Wheels - Leaking
- Alignment - Front Suspension Caster Adjustment
- Wheels - Cast Aluminum Wheel - Porosity Repairs
- Wheels - Procedure For Removing Tight Fitting Wheels
- Hub Assembly Seal - Squeak/Squawk Noise
- By Symptom
- Abnormal/Uneven wear
- Customer Interest
- Tires/Wheels - Vibration Shortly After Tires Are Mounted on Rim
- Tires/Wheels - Low Tire/Leaking Cast Aluminum Wheels
- Cast Aluminum Wheels - Leaking
- Alignment - Front Suspension Caster Adjustment
- Wheels - Cast Aluminum Wheel - Porosity Repairs
- Wheels - Procedure For Removing Tight Fitting Wheels
- Hub Assembly Seal - Squeak/Squawk Noise
- Leaks
- Noise
- Sticking/Binding
- Vibration
- All Technical Service Bulletins
- Tires/Wheels - Information on Tire Radial Force Variation (RFV)
- Wheels/Tires - Use Of Nitrogen Gas In Tires
- Tires - Information On Proper Tire Pressure
- Tires/Wheels - OE Tire Shake/Vibration Information
- Tires/Wheels - Vibration Shortly After Tires Are Mounted on Rim
- Wheels/Tires - Refinishing Aluminum Wheels
- Wheels - Changing Procedures/Precautions
- Tires/Wheels - Low Tire/Leaking Cast Aluminum Wheels
- Tires/Wheels - Tire Puncture Repair Procedures
- Wheels/Tires - Replacement Wheel Weight Information
- Wheels/Tires - Accessory Wheel And Tire Information
- Wheels/Tires - Chrome/Steel Valve Stem Cap Precautions
- Wheels/Tires - Upsized Wheel/Tire Characteristics
- Tires/Wheels - Wheel Weight Usage Precautions
- Cast Aluminum Wheels - Leaking
- Alignment - Front Suspension Caster Adjustment
- Aluminum Wheel - Coated Wheel Weights
- Wheels - Cast Aluminum Wheel - Porosity Repairs
- Wheels (Aluminum) - Coated Balance Weight Usage
- Wheels - Sealing Leaking Cast Aluminum
- Wheels - Nylon Coated Wheel Weights
- Wheels - Procedure For Removing Tight Fitting Wheels
- Wheels - Clear Coat Scratch Removal
- Warranty - OE Chrome Plated Aluminum Wheel ID
- Tires -�Firestone Dealer Assistance Phone Number Change
- Wheels (Steel) - Proper Changing Procedure
- Tires - Speed Rated Information
- Wheels - Locking Wheel Nuts Impact On Tire Balance
- Hub Assembly Seal - Squeak/Squawk Noise
- Wheels - Wire Wheel Cover Production Change
- Wheels - Locking Wire Wheel Covers
- Drivetrain - Drive Axle Nut Sizes
- Suspension - Installation of Hub Bearing Seal
- Wheels - Chrome Wheel Brake Dust Accumulation/Pitting
- Wheels - Chromed Aluminum Wheel Staining/Pitting/Corrosion
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.