SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK1968WILDCAT BASE, STANDARD TRANS, TRANS MFR CD MUNCIEREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEIGNITION SYSTEMDISTRIBUTOR SPECIFICATIONSDELCO-REMY DISTRIBUTOR ADVANCE SPECIFICATIONS
1968 Buick Wildcat Base, Standard Trans, Trans Mfr CD Muncie

DELCO-REMY Distributor Advance Specifications

1968 Buick Wildcat Base, Standard Trans, Trans Mfr CD MuncieSECTION DELCO-REMY Distributor Advance Specifications
NOTE: FOR ENGINE RPM AND DEGREES, MULTIPLY SPECIFICATIONS BELOW BY 2.
Distributor Port No. Rot (1) Automatic Advance (Distr. Degrees & RPM) Vacuum Advance (Distr. Deg. & In. of Hg.) Vacuum Unit No.
Deg. RPM Deg. RPM Deg. RPM Deg. RPM Start Deg. In. Hg. Max. Deg In. Hg.
1110307 C 0-2 475 10-12 1200 .............................. 17-19 1700 0 5-7 11.5 11.5-13 1116198
1110311 C 0-2 975 5-7 1600 .............................. 9-11 2100 0 6-8 12 14.5-15.5 1116230
1110319 C 0-2 500 1-3 600 5-7 1500 9-11 2400 0 6-8 12 14.5-15.5 1116230
1110371 C 0-4 500 7-11 675 9.4-11.4 740 15-17 1500 0 5-7 11 13.8-14 1116248
1110389 C 0-3 500 6-8 700 .............................. 12-14 2200 0 6-8 12 14.5-15.5 1116230
1110399 C 1.5-3.5 600 7.5-9.5 975 .............................. 13-15 2100 0 6-8 11.5 15.5-17 1116217
1110426 C 1.5-3.5 600 6-8 850 .............................. 11-13 1800 0 6-8 12 14.5-15.5 1116230
1110430 C 0-4.8 500 4.8-9.5 600 .............................. 13-15 2200 0 4-6 7.5(2) 9.2-10.2 1973413
1110431 C 0-1.9 500 6-8 825 .............................. 12-14 2500 0 4-6 7.5(3) 9.2-10.2 1973414
1110433 C .6-2.6 600 7.5-9.5 1050 .............................. 15-17 2300 0 6-8 11.5 15.5-17 1116217
1110434 C 2-4 800 .......................... ............................ 13-15 2100 0 6-8 12 14.5-15.5 1116230
1110436 C 0-3.8 550 3-5 630 9.5-11.5 1050 17-19 2300 0 6-8 11.5 15.5-17 1116217
1110437 C .6-2.6 600 7.5-9.5 1050 .............................. 15-17 2300 0 6-8 11.5 15.5-17 1116217
1110438 C 0-3.8 550 3-5 630 9.5-11.5 1050 17-19 2300 0 6-8 11.5 15.5-17 1116217
1110439 C 0-3 500 2.2-5.2 580 9.5-11.5 975 15-17 2100 0 6-8 11.5 15.5-17 1116217
1110441 C 0-3 500 2.2-5.2 580 9.5-11.5 975 15-17 2100 0 6-8 11.5 15, 5-17 1116217
1110442 C 0-1.9 500 8.5-10.5 1000 .............................. 13-15 2100 0 6-8 11.5 15.5-17 1116217
1110443 C 0-3 500 2.2-5.2 580 10.5-12.5 1000 15-17 2100 0 6-8 11.5 15.5-17 1116217
1110444 C 0-3 350 0-3.5 400 8-10 1000 12-14 2000 0 5-7 11 15.5-17 1116207
1110447 C 0-2.1 500 7.5-9.5 850 .............................. 13-15 1850 0 6-8 12 14.5-15.5 1116230
1110449 C 0-1.9 500 6-8 825 .............................. 12-15 2500 0 4-6 7.5 9.2-10.2 1973413
1111106 C .6-2.6 500 7.5-9.5 925 .............................. 15-17 2200 0 4-6 12 18-19.3 1115362
1111150 C 1.5-3.5 600 4-6 750 6.5-8.5 1000 13-15 2100 0 7-9 8 15-17 1116201
1111168 C 0-2.2 500 3.2-5.5 640 6.5-8.5 850 12-14 2350 0 9-11 8 16.5-17.5 1968861
1111169 C 0-2.7 500 2.5-5 600 7.5-9.5 1000 15-17 2500 0 7-9 8 15-16 1116201
1111170 C 0-2.7 500 2.5-5 600 7.5-9.5 1000 15-17 2500 0 6-8 6.4 11.3-12.5 1115360
1111191 C .5-2.5 500 7.5-9.5 1000 .............................. 13-15 2200 0 8-10 12 18.5-20.5 1115363
1111194 C 0-3 500 1.5-4.5 550 6.5-7.5 750 14-16 2550 0 5-7 8 11.2-127 1115355
1111198 C .5-2.5 450 7.5-9.5 800 .............................. .4-16 1950 0 4-6 12 18-19.3 1115362
1111239 C .3-2.3 400 7.3-9.3 975 .............................. 13-15 2200 0 8-10 12.5(3) 18.5-20.5 1973409
1111257 C .7-2.7 600 4-6 800 .............................. 13-15 2100 0 5-7 8 11.2-12.7 1115355
1111264 C 0-3 525 4.7-7.7 680 9-11 900 14-16 2350 0 9-11 8 16.5-17.5 1968861
1111266 C 0-2.6 550 10.3-13 960 11-13 980 15-17 2075 0 9-11 8 16.5-17.5 1968861
1111270 CC 0-2 500 5-7 1000 .............................. 9-11 2300 0 10-12 10(3) 17-18.8 1973412
1111272 CC .5-2.5 500 7.5-9.5 950 .............................. 15-17 2275 0 8-10 10(3) 15-17 1973411
1111277 C 0-2.6 500 2-4.7 580 15-17 2500 14.3-17 3000 0 6-8 8 14.5-15.75 1116201
1111278 C 0-2.6 500 2-4.7 580 15-17 2500 14.3-17 3000 0 6-8 6.4 11.3-12.5 1115360
1111281 CC 1-3 550 6.5-8.5 975 .............................. 11-13 2400 0 8-10 10(3) 15-17 1973411
1111282 CC 1.5-3.5 700 4-6 1000 .............................. 8-10 2500 0 8-10 10(3) 15-17 1973411
1111284 C .4-2.4 450 8.5-10.5 875 .............................. 13-15 2300 0 6-8 8 14.5-15.75 1116210
1111285 C 0 500-600 9.5-11.5 900 .............................. 15-17 2300 0 6-8 7-9 16 1116210
1111286 CC 0-1.8 400 1.7-4 500 2.2-4.2 520 14-16 2000 0 8-10 12.5 18.5-20.5 1973408
1111287 CC .4-2.4 500 8-10 900 .............................. 10-12 2000 0 8-10 12.5 18.5-20.5 1973408
1111289 CC .4-2.4 700 ........................ .............................. 6-8 1500 0 8-10 12.5 18.5-20.5 1973408
1111290 CC .3-2.3 500 8-10 900 10-12 2000 8.8-12 3000 0 8-10 12.5 18.5-20.5 1973408
1111291 CC 0-2 425 8-10 900 13-15 2000 11.8-15 3000 0 6-8 13 16-17.5 1973407
1111292 CC .5-2.5 750 6-8 1500 .............................. 4.2-8 3000 0 8-10 12.5 18.5-20.5 1973408
1111293 C 0-2.7 500 2.5-5 600 7.5-9.5 1000 15-17 2500 0 6-8 6.4 11.3-12.5 1115360
1111294(4) C 0-2.6 500 2-4.7 580 15-17 2500 14.3-17 3000 0 6-8 6.4 11.3-12.5 1115360
1111295(4) C .5-3.3 700 6.7-9.5 930 13.5-15.5 2500 12.7-15.5 3000 ........................ .............................. 1115373
1111296(4) C 0-2 550 14-16 1900 .............................. 12.5-16 3000 0 6-8 8 14.5-15.75 1116201
1111297 C 1.5-3.5 600 7.5-9.5 950 .............................. 14-16 2050 0 9-11 8 16.5-17.5 1968861
1111298 C 0-3 500 2-5 570 10-12 1000 16-18 2050 0 6-8 8 14.5-15.75 1116201
1111299 CC 0-2 400 6-8 900 .............................. 9-11 2300 0 10-12 10 17-18.8 1973412
1111300 CC 0-2 500 5-7 1000 .............................. 9-11 2300 0 10-12 10(3) 17-18.8 1973412
1111327 C .5-3 400 11-13 1000 .............................. 15-17 2200 ....................... .............................. ............
1111328 C .4-3 400 10-13 1000 15-17 2000 13.8-17 3000 ....................... .............................. ............
1111330 C 0-3 600 7.5-10.5 870 8.5-10.5 900 13-15 2300 0 6-8 8 14.5-15.75 1116210
111399 C 0 400-500 7.5-9.5 975 .............................. 13-15 2100 0 6-8 10-12 17 1116217
111435 CC 0-2 480 6-8 1000 .............................. 10-12 2300 0 10-12 10(3) 17-18.8 1973412
1111438 C 0-3 525 4.7-7.7 680 9-11 900 14-16 2350 0 6-8 8 14.5-15.75 1116201
1111439 C 0-2.7 600 5.2-8.4 800 6.7-8.7 850 15-17 2200 0 5-7 8 11.2-12.7 1115355
1111440 C 0-2 550 3-5 700 .............................. 17-19 1975 0 5-7 8 11.2-12.7 1115355
1111441(4) C 0-3.3 500 6-9 685 14-16 2200 128-16 3000 0 6-8 8 14.5-15.75 1116201
1111443 C 0-2 600 4.7-7.7 680 .............................. 15-17 1975 0 5-7 8 11.2-12.7 1115355
1111444 C 0-3 525 6.7-8.7 740 9-11 900 14-16 2350 0 6-8 8 14.5-15.75 1116201
1111445 C 0-4 500 2.5-6.7 560 9.5-11.5 1000 17-19 2500 0 6-8 8 14.5-15.75 1116201
1111447 CC 0-2 640 3.5-5.5 950 .............................. 8-10 2400 0 8-10 10(3) 15-17 1973411
111448 CC 1-3 700 5-7 1000 .............................. 9-11 2300 0 10-12 10(3) 17-18.8 1973412
1111449 CC 1-3 700 5-7 1000 .............................. 9-11 2300 0 8-10 10 (3) 15-17 1973411
1111450 CC 1.3-3.3 700 6-8 1000 .............................. 10-12 2300 0 8-10 10 15-17 1973411
1111463 CC 1.4-3.4 550 ........................ .............................. 10-12 2000 0 6-8 13 16-17.5 1973407
1111466 CC 0-2 650 6.5-8.5 1300 .............................. 11-13 2000 0 6-8 13 16-17.5 1973407
1111467 C 2-4.5 750 10.3-13 1090 10.7-13.1 1100 15-17 2200 0 9-11 8 16.5-17.5 1968861
1111468 CC .5-2.5 450 7-9 1000 .............................. 9-11 1900 0 10-12 8.7 16.2-17.8 1973418
1111469 CC 0-2 550 ........................ 5-7 1000 9-11 1800 0 8-10 12.5 18.5-20.5 1973408
1111470 CC .5-2.5 450 7-9 1000 9-11 1900 7.8-11 3000 0 10-12 8.7 16.2-17.8 1973418
1111471   0-2 550 5-7 1000 9-11 1800 7.5-11 3000 0 8-10 12.5 18.5-20.5 1973408
1111472 C .5-2.5 550 7.5-9.5 1000 .............................. 13-15 2000 0 4-6 12 18-19.3 1115362
1111473 C 0-2.5 450 8-10.5 790 8.5-10.6 805 14-16 2200 0 8-10 12.5 18.5-20.5 1115363
1112795 C 0-2 425 4.5-6.5 800 8-10 1600 11-13 2300 ....................... .............................. ............
(1) C (Clockwise); CC (Counterclockwise) viewed from rotor end
(2) Maximum retard is 1.75-3.25° at 11" Hg
(3) Maximum retard is 4-6° at 11" Hg
(4) Breakerless (Pulse Generator) distributor used with transistor or Capacitor Ignition Systems.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.