Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK1965SKYLARK 2D CONVERTIBLE, 7.0L ENG, NOT AVAILABLE TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONBRAKESMAP - BRAKE SYSTEMSBRAKE SYSTEMSPARKING BRAKE SWITCHES
1965 Buick Skylark 2D Convertible, 7.0L Eng, Not Available Trans
Parking Brake Switches
1965 Buick Skylark 2D Convertible, 7.0L Eng, Not Available TransSECTION Parking Brake Switches
| Condition | Code | Procedure |
|---|---|---|
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Binding, affecting performance | A | Require repair or replacement |
| Binding, not affecting performance | 2 | Suggest repair or replacement |
| Broken | A | Require repair or replacement |
| Burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Burned, not affecting performance | 2 | Suggest repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Cracked, affecting performance | A | Require repair or replacement |
| Cracked, not affecting performance | 1 | Suggest repair or replacement |
| Leaking | B | Require repair or replacement |
| Malfunctioning | A | Require repair or replacement |
|
NOTE:
Includes inoperative, intermittent operation, or failure to perform all functions.
|
||
| Melted, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Melted, not affecting performance | 2 | Suggest repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Missing | C | Require replacement |
| Out of adjustment | B | Require repair or replacement |
| Terminal broken | A | Require repair or replacement |
| Terminal burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Terminal burned, not affecting performance | 2 | Suggest repair or replacement |
| Terminal corroded, affecting performance | A | Require repair or replacement |
| Terminal corroded, not affecting performance | 2 | Suggest repair or replacement |
| Terminal loose, affecting performance | B | Require repair or replacement |
| Terminal loose, not affecting performance | 1 | Suggest repair or replacement |
| Won't return | A | Require repair or replacement |
| Worn | 1 | Suggest replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.