New Jersey

1963 Buick Invicta Eng CD JU, Standard TransSECTION New Jersey
NOTE: The New Jersey program incorporates original U.S. EPA recommended start-up ASM5015 standards for 1981 and newer model year vehicles. Refer to appropriate model year range in appropriate table. See U. S. EPA ASM2525 & ASM5015 START-UP EMISSION STANDARDSΒ .
NEW JERSEY EMISSION STANDARDS - 2-SPEED IDLE TEST

Application Idle HC ppm (CO %) 2500 RPM HC ppm (CO %)
Light Duty Vehicles (8500 GVWR Or Less)
1967 & Earlier 1400 (8.5) .....
1968-70 700 (7.0) .....
1971-74 500 (5.0) .....
1975-80 300 (3.0) .....
1981 & Newer 220 (1.2) 100 (0.5)
Heavy Duty Vehicles (8501 GVWR Or Greater)
1967 & Earlier 1400 (8.5) .....
1968-70 1200 (8.5) .....
1971-74 700 (6.0) .....
1975-78 500 (4.0) .....
1979 & Earlier 300 (3.0) .....
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.