(Remove intermediate pipe)

2024 BMW M3 Competition xDriveSECTION (Remove intermediate pipe)
WARNING: Hot surfaces 
Risk of burning! 
  • Perform all work only on components that have cooled down
  • Version A: 

    Loosen screw (1)

    G14925411Courtesy of BMW OF NORTH AMERICA, INC.
  • Loosen screw (1)
    G14925412Courtesy of BMW OF NORTH AMERICA, INC.
  • Version B: 

    Loosen screw (1)

    G14928475Courtesy of BMW OF NORTH AMERICA, INC.
  • Release nut (1)
    G14928476Courtesy of BMW OF NORTH AMERICA, INC.
  • Unscrew the nuts (arrows)
  • Feed the intermediate pipe (1) out and remove
G14928477Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.