1700 Cooling, Test Technical Data (X5 M)

2023 BMW X5 M BaseSECTION 1700 Cooling, Test Technical Data (X5 M)
1700 TECHNICAL DATA OVERVIEW

Capacity of low-temperature coolant circuit F95/F96 
  S63B44T4 4.5 l
Coolant level 
Overfill quantity of coolant (above the maximum mark) in the high-temperature expansion tank  + 200 ml
Overfill quantity of coolant (above the maximum mark) in the low-temperature expansion tank (if installed)  + 100 ml
Cooling system capacity 
F95/F96 S63TU4 (High-temperature coolant circuit)  10.81
F95/F96 S63TU4 (Low-temperature coolant circuit)  4.51
Cooling system test pressure 
  Test pressure for cooling system (gauge pressure)  1.5 bar
High-temperature coolant circuit filling capacity F95/F96 
  S63B44T4  10.81
Opening pressure of coolant seal cover 
Pressure relief valve opens when the pressure exceeds the ambient pressure.  min. 2.0 bar
Electric changeover valve must open at latest when the pressure is lower than the ambient pressure  max. 0.1 bar
Test conditions for coolant level 
  Coolant must be cooled down   
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.